Crosley Radio Stereo System CR66 User Manual

CR66  
ROCHESTER  
910-245000-001  
 
 
IMPORTANT SAFETY INSTRUCTION  
General  
PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT SAFEGUARDS  
THAT ARE APPLICABLE TO YOUR EQUIPMENT  
1. Read Instructions - All the safety and operating instructions should be read before the product is operated.  
2. Retain instructions - The safety and operating instructions should be retained for future reference.  
3. Heed Warnings - All warnings on the product and in the operating Instructions should be adhered to.  
4. Follow Instructions - All operating and use instructions should be followed.  
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use  
a damp cloth for cleaning.  
Troubleshooting  
6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.  
7. Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or  
laundry tub; in a wet basement; or near a swimming pool; and the like.  
8. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven  
surfaces may cause the product and cart combination to overturn.  
There is no Power  
1
The AC plugged is not well connected.  
2
Check to see that the ON/OFF volume knob is  
in the on position.  
9. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable  
operation of the product and to protect it from overheating, and these openings must not be blocked  
or covered, The openings should never be blocked by placing the product on a bed, sofa, rug, or  
other similar surface. This product should not be placed in a built - in installation such as a bookcase  
or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.  
10. Power Sources - This product should be operated only from the type of power source indicated on the marking label,  
if you are not sure of the type of power supply to your home. Consult your product dealer or local power company. For  
products intended to operate from battery power, or other sources, refer to the operating instructions.  
11. Grounding or Polarization - This product may be equipped with a polarized alternating-current line plug (a plug having  
one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you  
are unable to insert the plug fully into the outlet try reversing the plug, If the plug should still fail to fit, contact your  
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.  
12. Power - Cord Protection - Power - supply cords should be routed so that they are not likely to  
be walked on or pinched by items placed upon or against them, paying particular attention to  
cords at plugs, convenience receptacles, and the point where they exit from the product.  
There is no Sound  
1
Check the volume level by turning the volume  
knob.  
Turntable will not work  
1
Make sure the function switch is set to phono.  
2
Try moving the tone arm to the right until you  
hear a click.  
AC  
13. Lightning - For added protection for this product during a lightning storm, or when it is left  
Polarized Plug  
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect  
3
Make sure the protective needle cover is  
removed.  
the antenna or cable system. This will prevent damage to the product due to lightning and power - line surges.  
14. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric  
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,  
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.  
15. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result  
in a risk of fire or electric shock.  
CD does not play  
1
Check to make sure CD is inserted correctly  
(label side facing up).  
16. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch  
dangerous voltage points or short - out parts that could result in a fire or electric shock. Never spill liquid of any kind  
on the product.  
17. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous  
voltage or other hazards. Refer all servicing to qualified service personnel.  
2
3
Check that the surface of the CD is clean  
Make sure function switch is set to CD.  
18. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel  
under the following conditions;  
a. When the power-supply cord or plug is damaged.  
.
If liquid has been spilled, or objects have fallen into the product.  
c. If the product has been exposed to rain or water.  
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that  
are covered by the operating instructions as an improper adjustment of other controls may result in damage and  
will often require extensive work by a qualified technician to restore the product to its normal operation.  
e. If the product has been dropped or damaged in any way.  
f. When the product exhibits a distinct change in performance - this indicates a need for service.  
19. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement  
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions  
may result in fire, electric shock, or other hazards.  
20. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety  
checks to determine that the product is in proper operating condition.  
21. Wall or ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer.  
22. Heat - The product should be situated away from heat sources such as radiators. Heat registers, stoves, or other  
products (including amplifiers) that produce heat.  
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could  
void the user’s authority to operate the equipment.  
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part  
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee  
that interference will not occur in a particular installation. If this equipment does cause harmful intereference to radio or  
television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct  
the interference by one or more of the following measures:  
-
-
-
-
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio TV technician for help.  
11  
2
 
CD Operation  
Welcome  
Table of Contents  
Thank you for purchasing the Crosley Rochester  
(CR66). Before operating this unit, please read this  
manual thoroughly and retain it for future reference.  
Getting Started  
Repeat Playback  
Programmed Playback  
Control Locators....................... 4,5  
Unpacking................................. 6  
Power Source........................... 6  
1
2
To repeat a single track, choose the track that  
you want to repeat, then press the PLAY BUTTON  
(16) to start the track. Press the REPEAT  
BUTTON (10) once to repeat this track. The  
REPEAT INDICATOR (9) will flash.  
1
2
Press the PROGRAM BUTTON (8). " 01" will  
shown on the display and the PROGRAM  
INDICATOR (7) will flash.  
About This Manual  
Press the FORWARD SKIP BUTTON (13) or  
the BACKWARD SKIP BUTTON (11) to select  
a track.  
Instructions in this manual describe the control  
functions of the CR66.  
To repeat all tracks, press the PLAY BUTTON  
(16) to start the CD. Press the REPEAT  
BUTTON (10) twice to repeat all tracks. Once  
the CD ends, it will star over again from the  
beginning of the CD. The REPEAT INDICATOR  
(9) will remain on.  
Base Operation  
Turntable Operation.................. 7  
3
4
5
Press the PROGRAM BUTTON (8) again to  
store the selected track number.  
Accessory: Adapter for 45 rpm  
.................................................. 7  
Cassette Operation.................. 8  
Repeat steps 2 and 3 above to program other  
tracks.  
3
To erase the repeat function, press the REPEAT  
BUTTON(10) again until the REPEAT INDICATOR  
(9) is off.  
Radio Operation....................... 8  
Press the PLAY BUTTON (16) to start  
Programmed playback. The PROGRAM  
INDICATOR (7) will be on.  
CD Operation  
6
To erase the programmed sequence, press the  
STOP BUTTON (14) twice or until the  
PROGRAM INDICATOR (7) is off. Programmed  
tracks will also erase when the CD DOOR  
(17) is opened.  
Playing a CD............................ 9,10  
Programmed Playback............. 10  
NOTE: Maximum of 20 tracks can be programmed  
to play in any order.  
General  
Troubleshooting Guide.......... 11  
Warranty..............................  
12  
10  
3
 
Control Locators  
CD Operation  
Playing A CD  
Skip Forward And Skip Reverse  
Unit Controls  
1
1. SPEAKER  
2. FUNCTION SWITCH  
3. TUNING KNOB  
4. DIAL SCALE  
5. ON/OFF-VOLUME  
ROTARY KNOB  
6. AM/FM BAND SWITCH  
7. PROGRAM INDICATOR  
8. PROGRAM BUTTON  
9. REPEAT INDICATOR  
10. REPEAT BUTTON  
11. B.SKIP BUTTON  
12. LED DISPLAY  
13. F.SKIP BUTTON  
14. STOP BUTTON  
15. PLAY INDICATOR  
16. PLAY/PAUSE BUTTON  
17. CD DOOR  
1
Press the FORWARD SKIP BUTTON (13) or  
the BACKWARD SKIP BUTTON (11) to select  
a track.  
1
2
Rotate the FUNCTION SWITCH (2) to CD.  
Press the OPEN/CLOSE BUTTON (18) to open  
the CD DOOR (17). Place a disc in the tray  
with the labeled side of the disc facing up.  
2
Press the PLAY BUTTON (16) to start playing  
the selected track  
3
Press the OPEN/CLOSE BUTTON (18) again  
close the CD DOOR (17). The display will  
show “—“ for a few seconds, then the total  
number of tracks on the disc will be displayed.  
“00” will be shown when there is no disc inside  
the unit.  
TAPE  
RADIO  
CD  
PHONO  
VOLUME  
ON  
OFF  
MAX.  
Search Forward And Reverse During Play  
AM FM  
PROG  
.
REPEAT  
B.SKIP  
F.SKIP  
STOP  
PLAY  
OPEN/CLOSE  
8.8  
.
PLAYBACK  
4
5
6
Press the PLAY BUTTON (16) to start playback.  
The PLAY INDICATOR (15) will light up.  
1
Press and hold the FORWARD SKIP BUTTON  
(13) or the BACKWARD SKIP BUTTON (11) to  
search forward or backward though the selected  
track.  
Adjust the VOLUME ROTARY KNOB (2) to the  
desired volume level.  
3
4
2
5
2
Release the button at the desired point, playback  
will resume automatically.  
To pause playback, press the PLAY/PAUSE  
BUTTON (16). The PLAY INDICATOR (15) will  
flash. Press the PLAY BUTTON (16) again to  
resume playback.  
CD  
PHONO  
TAPE  
RADIO  
VOLUME  
18. OPEN/CLOSE BUTTON  
ON  
OFF  
MAX.  
AM FM  
PROG.  
REPEAT  
B.SKIP  
F.SKIP  
STOP  
PLAY  
OPEN/CLOSE  
7
To stop playback, press the STOP BUTTON  
(14). The PLAY INDICATOR (15) will go off.  
8.8  
.
7
9
11  
13  
15  
17  
6
8
10  
12  
14 16 18  
4
9
 
Cassette & Radio Operation  
Control Locators  
Radio Operation  
Cassette Operation  
Unit Controls  
20  
21  
19  
1
2
Rotate the FUNCTION SWITCH (2) to TAPE  
position.  
1
2
3
4
Rotate the FUNCTION SWITCH (2) to select  
RADIO mode.  
19. TURNTABLE  
20. SPINDLE  
21. ADAPTER FOR  
45 RPM RECORD  
22. TONE ARM  
Insert a prerecorded tape through the CASSETTE  
DOOR (29). Tape will slide into the cassette  
mechanism and start playing.  
Set the AM/FM BAND SWITCH (6) to the desired  
band (AM or FM).  
22  
23  
23. SPEED CONTROL SWITCH  
Select the desired radio station by rotating  
TUNING KNOB (3)  
1
(33  
/
, 45, 78 RPM)  
3
3
4
Adjust the volume level by turning the VOLUME  
KNOB (5).  
24. TONE ARM REST  
24  
25. SECURITY HOOK  
25  
Adjust the ON/OFF-VOLUME ROTARY KNOB  
(5) to the desired sound level.  
For fast forwarding, press the CASSETTE  
EJECT/F.F (28) half way in. Pressing again,  
will stop the fast forwarding and return the  
cassette to the playing mode.  
26. EXTERNAL ANTENNA  
27. AC POWER PLUG CORD  
28. CASSETTE EJECT / FAST FORWARD  
29. CASSETTE DOOR  
Antenna  
5
6
To stop and eject the cassette, press the  
CASSETTE EJECT/F.F (28) in completely.  
Antenna: for FM reception, the unit is provided with  
a FM WIRE ANTENNA (26) , move the wire until  
the reception is clear and with no interferences. For  
AM reception, the unit is provided with a directional  
build-in ferrite antenna. Rotate the set to find the  
position in which the best reception is obtained. Do  
When one side of the tape finishes playing, the  
cassette will automatically stop.  
NOTE: Remove the tape from the unit when it is not  
in use or stopped.  
not connect the EXTERNAL FM ANTENNA (26) to  
any outside antenna.  
26  
27  
28  
29  
5
8
 
Getting Started  
Turntable Operation  
Unpacking  
Power Source  
Turntable Operation  
Accessory: ADAPTER FOR 45 RPM  
Turn the unit on by rotating the ON/OFF-VOLUME  
ROTARY KNOB (5) located on the front panel to  
the ON position.  
This adaptor allows you to play 45 RPM records.  
1
Remove packing materials from unit.  
Note: Save all packing materials.  
1
2
Unwind the AC POWER CORD (27) at the back  
of the unit and connect it to a power outlet.  
1
Rotate the FUNCTION SWITCH (2) to select  
PHONO mode.  
2
3
4
Remove plastic bag covering radio.  
Plug A/C cord into appropriate outlet.  
Remove plastic safety cover from A/C plug.  
2
Set the SPEED CONTROL SWITCH (23) to  
desire speed (33 1/3,45 or 78 rpm). Place the  
record on the turntable.  
AC  
Remove tie from A/C cord and untie antenna  
wire on back of radio.  
1
2
Place the 45 RPM adaptor over the spindle.  
Polarized Plug  
Gently place your 45 RPM record onto the  
turntable.  
3
4
Pull the TONE ARM (22) slightly to the right  
side until hear the “click”sound to activate the  
turntable.  
5
6
7
Open lid and remove styrofoam shipping  
material from turntable.  
3
This product is equipped with a polarized  
alternating current line plug (a plug having one  
blade wider than the other). This plug will fit into  
the power outlet only one way. This is a safety  
feature, If you are unable to insert the plug fully  
into the outlet, try reversing the plug. If the plug  
should still fail to fit, contact you electrician to  
replace your obsolete outlet. Do not defeat the  
purpose of the polarized plug.  
3
Follow the steps under turntable operation to  
play your record.  
Remove black tie-wrap from under the tone  
arm.  
Move the TONE ARM (22) by hand over the  
record and slowly lower it. Adjust the ON/OFF-  
VOLUME ROTARY KNOB (5) to the desired  
listening level.  
Remove white protective needle cover by gently  
pulling towards the front of the unit.  
5
At the end of the record, the TONE ARM (22)  
will stop automatically. You must return to TONE  
ARM to arm rest by hand.  
8
Untie the FM antenna and allow it to hang down  
in a straight line for optimum FM reception. If  
you have trouble tuning in an FM station, move  
the external FM antenna for best reception. Do  
no connect FM antenna to outside antenna.  
7
6
 

Compaq Server AA RHGWC TE User Manual
Craftsman Snow Blower 53688626 User Manual
Creda Microwave Oven 48312 User Manual
Cub Cadet Lawn Mower 1572 User Manual
D Link Printer DPR 1020 User Manual
Federal Security Camera Speaker 300GC User Manual
FEIN Power Tools Cordless Drill ASB 14V User Manual
Frigidaire Oven 318205308 User Manual
GE Monogram Microwave Oven ZMC1090 Series User Manual
Global Machinery Company Drill MAG950HD User Manual