Crosley Radio Speaker CR17 User Manual

WARRANTY  
Crosley Radio Products are warranted against defects in material and  
workmanship for a period of 90 days beginning from the date of sale to the  
original purchaser.  
CR17  
Should the unit fail under normal usage during the 90 day warranty period, a  
request for RETURN AUTHORIZATION (R.A.) must be made by the original  
customer before returning the unit. Call Crosley Radio customer service for  
Return Authorization at (502) 583-4246 from 9 AM to 5 PM (EST) Monday to  
Friday.  
i - Juke  
Instruction Manual  
Upon receiving the RETURN AUTHORIZATION number from the Customer  
Service Department, properly pack your unit in its original packaging. Include  
any adapters, parts, & accessories which were originally provided with the  
product, along with a check or money order for $19.95 made out to Crosley  
Radio to cover the handling and return postage. Display the R.A. # on the  
outside of the carton and ship PREPAID via standard UPS or its equivalent.  
MUTE  
VOL  
+
ATTN: RETURNS DEP'T  
2001 PRODUCTION DRIVE  
BAY 2 & 3  
albums  
VOL  
-
LOUISVILLE, KY 40299  
extras  
CROSLEY RADIO assumes no responsibility for units sent without prior Return Authorization.  
The purchaser’s bill of sale is the only proof of warranty entitlement and must accompany the unit.  
The warranty does not cover damage due to acts of nature, accident, misuse, abuse, negligence, commercial  
use or modification of, or to any part of the product. This warranty does not cover damage due to improper  
operation or maintenance, connection to improper voltage supply, or attempted repair by anyone other than  
a facility authorized by Crosley Radio to service the product. This warranty does not cover products sold  
AS IS or consumables (such as fuses or batteries). This warranty is valid only in the United States.  
This warranty gives the purchaser specified legal rights in addition to any rights which may vary from state  
to state.  
In accordance with the "Moss-Magnuson Warranty Act" of July 10, 1975, this is termed a "limited warranty"  
which in no way compromises Crosley Radio‚ high standards of Quality and Workmanship.  
910-256700-001  
11-8-06  
 
Connecting Optional Equipment  
WARNING:  
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS  
APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER.  
PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE  
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE  
PERSONNEL.  
External Outputs  
Auxiliary Inputs  
The iJuke (CR17) is equipped with external speaker  
outputs which will allow you to hook up external  
speakers.  
You can connect external audio devices such as CD  
Players or other MP3 players by using the Auxiliary  
Input (Aux In) jack and the supplied Auxiliary cable.  
To connect an external devise, follow the directions  
below.  
1
The speaker jacks for external speakers are 4  
ohm jacks and are located on the back of the  
unit. Beside the speaker jacks is the external /  
internal speaker switch which is labeled (EXT.  
/ INT.) When using external speakers, this switch  
must be switched to the EXT. position. Doing  
this turns off the internal speakers in the unit  
and redirects to power to the external speakers.  
CAUTION  
1
2
Connect one end of the supplied Auxiliary Cable  
to the Aux In jack on the back of your unit.  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
Connect the other end of the cable to the Audio  
Out Jack or Headphone Jack of your external  
component.  
The lighting flash with  
arrowhead symbol, within  
an equilateral triangle, is  
intended to alert user to  
the presence of uninsulated  
"dangerous voltage" within  
the product's enclosure  
that may be of sufficient  
magnitude to constitute  
risk of electric shock  
The exclamation point  
within an equilateral  
triangle is intended to  
alert user to the  
presence of important  
operating and  
maintenance (servicing)  
instruction in the  
literature accompanying  
the appliance.  
CAUTION: TO REDUCE  
THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE  
COVER (OR BACK). NO  
USER - SERVICEABLE  
PARTS INSIDE. REFER  
SERVICING TO QUALIFIED  
SERVICE PERSONNEL.  
Note: If your external component doesn’t have a 3.5mm  
output jack or headphone jack, you will need a  
different cable to make the connection. Check  
your local electronics retailer for different cable  
options.  
2
If you decide not to use the external speakers,  
be sure the switch is on INT. position or the  
internal speakers will not work.  
3
4
Begin play on the external component and adjust  
the volume of the iJuke to your desired listening  
level.  
to persons.  
See the owner’s manual for your external  
component for information on its operations.  
Specification  
Power Source  
:
Input AC110-240V 50-60Hz  
Output DC14V 2.5A  
Auxiliary cable  
Power Consumption : 30W  
Speaker Dynamic type 4” 4 Ohm x 2  
:
*
DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.  
9
 
Basic Operation  
Welcome  
Table of Contents  
Thank you for purchasing the i-Juke (CR17). Before  
operating this unit, please read this manual  
thoroughly and retain it for future reference.  
Getting Started  
Remote Control  
Lights / Bubble Tubes  
Control Locator...................... 4-5  
Unpacking.............................. 6  
Set Up.................................... 6  
Included with your iJuke is a full function remote  
control. It allows you to control the main power and  
volume of the iJuke and also gives you complete  
control of your iPod including menu functions on  
most iPod models. See below for a complete list of  
the remote functions.  
1
2
3
To turn on the lights, press the Light button on  
the front of the unit.  
About This Manual  
Adjust the Stage Light Switch to Stop or Run to  
make the Eternity Lights constant or in motion.  
Basic Operation  
Instructions in this manual describe the control  
functions of the iJuke (CR17).  
Using your iJuke.................... 7  
Remote Control...................... 8  
Lights / Bubble Tubes............ 8  
Power  
– The POWER button turns the iJuke  
on/off. When docked, pressing the  
power button will also turn your iPod  
on/off with the unit.  
The bubble tubes will start to bubble 10-15  
minutes after the lights are turned on.  
Note: The bubble tubes will not bubble unless the lights  
are turned on. If the tubes haven’t started to  
bubble within 15 minutes after turning on the  
lights, very LIGHTLY tap on the brown plastic  
below the bubble tube with your hand. Do not  
tap the bubble tube itself as it could cause the  
tube to break.  
Menu  
Mute  
– The MENU button allows you to access  
the menus on your iPod.  
– The MUTE button mutes the volume  
of the iJuke.  
Connecting Optional Equipment  
External Outputs.................... 9  
Auxiliary Inputs....................... 9  
– Pressing the FORWARD SKIP button  
once will take you to the beginning of  
the next song on your iPod. You can  
press and hold it to search forwards  
through the song that is playing.  
– Pressing the BACKWARD SKIP button  
once takes you to the beginning of the  
song your are listening to. Press it  
twice to go to the beginning of the  
previous song. You can also press and  
hold it to search backwards through  
the song that is playing.  
General  
Troubleshooting .................... 10  
Warranty................................. 11  
– The PLAY/PAUSE button is used to  
pause the song that is playing.  
Pressing it twice resumes playback.  
Up Select – The UP SELECT button moves  
upwards through the menu selections.  
DN Select – The DOWN SELECT button moves  
downwards through the menu  
selections.  
Select  
– The SELECT button enters your  
selections from the menus.  
– The REPEAT button allows you to  
repeat selected songs on applicable  
iPod models.  
Repeat  
Vol +  
Vol -  
– The VOLUME UP button Increases  
your volume level.  
– The VOLUME DOWN button  
decreases your volume level.  
POWER  
MENU  
MUTE  
SELECT  
UP ARROW  
DN ARROW  
VOL  
VOL  
+
-
REPEAT  
8
 
Basic Operation  
Control Locator  
Using your iJuke  
Unit Controls  
The iJuke features the Universal Dock that uses  
dock adapters that come with newer iPod models.  
Before inserting your iPod, you will need to install  
the correct dock adapter. By using the correct dock  
adapter, you can insert any iPod with a dock  
connector. If you have an older iPod model that did  
not come with a dock adapter, they are available on  
us at 1-866-Crosley. While docked, the iJuke will  
also charge your iPod. To connect your iPod, follow  
the steps below. If you’re iPod doesn’t have a dock  
connector, you can connect it to the unit by using  
the Auxiliary Cable that is supplied.  
3
4
Press the Power button to turn iJuke on.  
1
2
3
4
5
6
7
8
9
Power Indicator  
Power On/Off  
Lights On/Off  
Universal Dock  
Remote Sensor  
Speakers  
Mute Indicator  
Volume Up  
Volume Down  
Browse your iPod for songs and press the  
Play/Pause button. Your music should begin to  
play.  
1
2
3
7
MUTE  
VOL  
+
8
9
5
6
Adjust the volume to your desired listening level.  
albums  
VOL  
-
extras  
4
To remove the dock adapter, push your fingernail  
into the slot in the back of the adapter and lift  
up.  
5
6
10 Remote Storage  
11 Auxiliary Input (Aux In)  
12 Speaker Jacks  
13 Internal / External Speaker Switch  
(EXT. / INT.)  
14 Stage Light Stop & Run Switch  
15 DC Jack  
6
1
2
Insert the correct dock adapter that fits your  
iPod. Your iPod should fit snugly into the correct  
adapter. Gently press the adapter until it snaps  
firmly in place.  
Connect your iPod as shown in the illustration  
below.  
10  
Note: If your iPod does not have a dock connector, use  
the supplied Auxiliary Cable and hook your iPod  
to the Auxiliary Input (Aux In) jack on the back  
of the unit.  
7
4
11  
12  
13  
14 15  
 
Control Locator  
Getting Started  
22  
Remote Controls  
Unpacking  
16  
17  
23  
24  
1
Remove unit from box and remove all packing  
materials.  
Note: Save the box and packing materials in case the  
unit needs to be transported or returned.  
4
Plug the AC cord into an appropriate outlet.  
Note: This product is equipped with a polarized  
alternating-current line plug (a plug having one  
blade wider than the other.) This plug will fit into  
the power outlet only one way. This is a safety  
feature. If you are unable to insert the plug fully  
into the outlet try reversing the plug, if the plug  
should still fail to fit, contact your electrician to  
replace your obsolete outlet. Do not defeat the  
safety purpose of the polarized plug.  
16 Power  
POWER  
MENU  
MUTE  
17 Backward Skip  
18 Play / Pause  
19 Up Select  
20 Down Select  
21 Repeat  
22 Select  
23 Menu  
24 Mute  
SELECT  
25  
2
3
4
Remove plastic safety cover from A/C plug.  
Remove tie from A/C cord  
18  
19  
UP ARROW  
VOL +  
VOL -  
26  
DN ARROW  
REPEAT  
20  
21  
27  
Remove tie from A/C adapter.  
25 Forward Skip  
26 Volume Up  
27 Volume Down  
Set Up  
1
Check the carton for all the parts shown.  
Remote Control  
A/C adapter  
AC Power Cord  
5
Remove battery cover from remote control and  
install 2 AAA batteries (not included). Note the  
correct battery orientation.  
Auxiliary cable  
2
3
Plug the small end of the AC adapter into the  
DC Jack on the back of the unit.  
Plug the small end of the AC Power Cord into  
the AC adapter.  
6
Place the iJuke on a flat surface.  
Note: The speakers in the iJuke are shielded which  
limits the possibility of video interference if placed  
near a computer or television monitor.  
5
6
 

COBY electronic Tablet MID7120 User Manual
Compaq Personal Computer DA 10832 User Manual
Cooper Bussmann Network Card BU 945U E 80211 DSSS User Manual
Crosley Turntable CR89 User Manual
Cuisinart Griddle CGR 4C User Manual
Cuisinart Waffle Iron WMR H User Manual
Desa Oven FSDVBNC User Manual
Digicom Network Router ADSL Router User Manual
GE Dishwasher PDWT400RBB User Manual
Global Machinery Company Saw TS1800 User Manual