Crosley Radio Car Stereo System CR02 001A User Manual

25-2-08  
WARRANTY  
Crosley Radio Products are warranted against defects in material and  
workmanship for a period of 90 days beginning from the date of sale to the  
original purchaser.  
CR02-001A  
Should the unit fail under normal usage during the 90 day warranty period, a  
request for RETURN AUTHORIZATION (R.A.) must be made by the original  
customer before returning the unit. Call Crosley Radio customer service for  
Return Authorization at (502) 583-4246 from 9 AM to 5 PM (EST) Monday to  
Friday.  
Tempo Radio  
Upon receiving the RETURN AUTHORIZATION number from the Customer  
Service Department, properly pack your unit in its original packaging. Include  
any adapters, parts, & accessories which were originally provided with the  
product, along with a check or money order for $19.95 made out to Crosley  
Radio to cover the handling and return postage. Display the R.A. # on the  
outside of the carton and ship PREPAID via standard UPS or its equivalent.  
Instruction Manual  
AM/FM  
CLOCK  
ADJ.  
SLEEP  
SNOOZE/DIMMER  
W
AKE-  
T
O
ALM.SET  
ALM.ON/OFF  
+
VOLUME  
-
ATTN: RETURNS DEP'T  
2001 PRODUCTION DRIVE  
BAY 2 & 3  
+
iPOD/AUX  
TUNE  
-
LOUISVILLE, KY 40299  
POWER  
CROSLEY RADIO assumes no responsibility for units sent without prior Return Authorization.  
The purchaser’s bill of sale is the only proof of warranty entitlement and must accompany the unit.  
The warranty does not cover damage due to acts of nature, accident, misuse, abuse, negligence, commercial  
use or modification of, or to any part of the product. This warranty does not cover damage due to improper  
operation or maintenance, connection to improper voltage supply, or attempted repair by anyone other than  
a facility authorized by Crosley Radio to service the product. This warranty does not cover products sold  
AS IS or consumables (such as fuses or batteries). This warranty is valid only in the United States.  
This warranty gives the purchaser specified legal rights in addition to any rights which may vary from state  
to state.  
In accordance with the "Moss-Magnuson Warranty Act" of July 10, 1975, this is termed a "limited warranty"  
which in no way compromises Crosley Radio‚ high standards of Quality and Workmanship.  
12  
910-274200-0010-100  
22-1-08  
 
Operation  
Getting Started  
Using the Alarm  
Listening to Your iPod  
Unit Controls  
1
2 3  
4
5
6
7 8  
Playing and charging your iPod  
1
2
3
4
5
6
7
8
9
(iPod/Aux)/Play Button  
Volume - Button  
Volume + Button  
Remote sensor  
LCD Display  
Tune + Button  
Tune - Button  
Setting the Alarm  
1
Place the proper dock plate (not supplied) for  
your iPod in the Dock (17), then gently dock  
your iPod. When docked, the iPod will begin  
charging. The iPod will not overcharge.  
1
2
Press and hold the Alarm Set Button (15) until  
the alarm time flashes.  
+
+
TUNE  
-
VOLUME  
-
iPOD/AUX  
POWER  
Press the Tune + (6) or Tune - Button (7) to set  
the alarm time(in 12 hour mode, a PM indicator  
appears when time is set to PM; there is no AM  
indicator.)  
2
3
Press the iPod Button (1) to play iPod, and  
again to pause.  
Power On/Off Button  
Speaker  
Adjust the volume level to the desired listening  
level by pressing the Volume + Button (3) or the  
Volume – Button (2).  
10 (BAND)AM/FM Button  
11 Clock Adjust Button  
12 Sleep Button  
13 Snooze/Dimmer Button  
14 Wake To Button  
15 Alarm Set Button  
16 Alarm ON/OFF Button  
17 iPod Dock  
3
4
Press Alarm Set Button (15) again. Alarm is now  
set. An alarm clock icon will show on the display  
as well as the alarm source icon.  
4
Press the Alarm Reset/Power Off Button (8) to  
turn the unit and the iPod off.  
Press the Wake To Button (14) repeatedly to select  
the desired wake to source: iPod, Radio or Buzzer.  
9
NOTE:  
Before turning the unit off, set the volume to the level  
you wish to wake to.  
Radio Operation  
10 11 12  
13  
14 15 16  
Arming and Disarming Alarm (Turn  
Alarm Function ON and OFF)  
Tuning and Playing the Radio  
1
2
3
4
Press the Radio Button (31) to select radio  
play mode.  
1
Press the Alarm On/Off Button (16) to arm or  
disarm alarm function. When armed, alarm  
icon appears in display.  
Press AM/FM Select Button (10/27) to select  
AM or FM band.  
AM/FM  
CLOCK ADJ.  
SLEEP  
SNOOZE/DIMMER  
WAKE-TO  
ALM.SET  
ALM.ON/OFF  
Snooze  
Press the Tune + (6) or Tune - Button (7) to tune  
radio to desired station.  
1
Press the Snooze/Dimmer Button (13/32) after the  
alarm sounds. The alarm will be silenced and  
come on again 9 minutes later. Snooze can be  
pressed several times during the 1 hour alarm  
cycle.  
17  
Press Volume + Button (3/25) or Volume - Button  
(2/29) to adjust the volume to desired sound  
level.  
5
Press the Alarm Reset/Power Off Button (8) to  
turn the radio off.  
iPod and Radio using the Remote control  
Press the Next track Button (26) or Previous track  
Button (30) when iPod is playing,or hold to scan  
current playing track.In Radio mode, press to tune  
station,hold to scan Radio station.  
8
5
 
IMPORTANT SAFETY INSTRUCTION  
General  
PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT SAFEGUARDS  
THAT ARE APPLICABLE TO YOUR EQUIPMENT  
Troubleshooting :  
1. Read Instructions - All the safety and operating instructions should be read before the product is operated.  
2. Retain instructions - The safety and operating instructions should be retained for future reference.  
3. Heed Warnings - All warnings on the product and in the operating Instructions should be adhered to.  
4. Follow Instructions - All operating and use instructions should be followed.  
Symptom  
Possible Problem  
Solution  
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use  
a damp cloth for cleaning.  
6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.  
7. Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or  
laundry tub; in a wet basement; or near a swimming pool; and the like.  
8. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven  
surfaces may cause the product and cart combination to overturn.  
9. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable  
operation of the product and to protect it from overheating, and these openings must not be blocked  
or covered, The openings should never be blocked by placing the product on a bed, sofa, rug, or  
other similar surface. This product should not be placed in a built - in installation such as a bookcase  
or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.  
10. Power Sources - This product should be operated only from the type of power source indicated on the marking label,  
if you are not sure of the type of power supply to your home. Consult your product dealer or local power company. For  
products intended to operate from battery power, or other sources, refer to the operating instructions.  
11. Grounding or Polarization - This product may be equipped with a polarized alternating-current line plug (a plug having  
one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you  
are unable to insert the plug fully into the outlet try reversing the plug, If the plug should still fail to fit, contact your  
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.  
12. Power - Cord Protection - Power - supply cords should be routed so that they are not likely to be walked on or pinched  
by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the  
point where they exit from the product.  
Plug the AM loop antenna connector to the jack  
on the back of the unit.  
No AM band radio sound  
but others OK  
AM loop antenna is not connected  
to the unit  
Move the AM loop antenna away from the main  
unit/iPod and rotate it for best reception  
No AM band radio is very  
noisy  
AM loop antenna isn’t located  
properly  
Sound is distorted  
Volume level is set too high  
Sound source is distorted  
Decrease the volume  
If the iPod original sound source(MP3) is old or of  
poor quality, distortion and noise are easily noticed  
with high-power speakers. Try a different audio  
source such as a music CD.  
If you are using an external sound source like  
older generation of iPod or iPod Shuffle, try  
reducing the output volume on the device itself.  
Also try turning bass boost OFF.  
Unit/adaptor gets warm  
after extended play at  
high volume  
This is normal  
Turn unit off for a while or lower volume  
13. Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for  
long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage  
to the product due to lightning and power - line surges.  
14. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric  
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,  
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.  
15. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result  
in a risk of fire or electric shock.  
16. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch  
dangerous voltage points or short - out parts that could result in a fire or electric shock. Never spill liquid of any kind  
on the product.  
17. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous  
voltage or other hazards. Refer all servicing to qualified service personnel.  
PROBLEMS?  
18. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel  
under the following conditions;  
5G iPod(iPod with video) or iPod nano  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the product.  
c. If the product has been exposed to rain or water.  
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that  
are covered by the operating instructions as an improper adjustment of other controls may result in damage and  
will often require extensive work by a qualified technician to restore the product to its normal operation.  
e. If the product has been dropped or damaged in any way.  
RESET YOUR iPOD (as per apple website)  
(will not affect music on your iPod)  
1. Move the Hold switch ON and OFF(slide it to Hold, then turn it off again)  
2. Press and hold the MENU + centre SELECT button until the Apple logo  
appears (about 6-10 seconds). You may need to repeat this step.  
NOTE : Please make sure that your iPod has the latest firmware. Check  
instructions on how to upgrade firmware for you iPod.  
f. When the product exhibits a distinct change in performance - this indicates a need for service.  
19. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement  
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions  
may result in fire, electric shock, or other hazards.  
20. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety  
checks to determine that the product is in proper operating condition.  
21. Wall or ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer.  
22. Heat - The product should be situated away from heat sources such as radiators. Heat registers, stoves, or other  
products (including amplifiers) that produce heat.  
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could  
void the user’s authority to operate the equipment.  
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part  
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee  
that interference will not occur in a particular installation. If this equipment does cause harmful intereference to radio or  
television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct  
the interference by one or more of the following measures:  
-
-
-
-
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio TV technician for help.  
11  
 
Table of Contents  
Operation  
Welcome  
Thank you for purchasing the Crosley Tempo Radio  
(CR02-001A). Before operating this unit, please  
read this manual thoroughly and retain it for future  
reference.  
Getting Started  
Remote  
Antennas  
Control Locators....................... 5-6  
Setting the Clock...................... 7  
Battery Backup......................... 7  
The Remote Control controls basic unit functions as  
well as basic iPod functions when the iPod is docked  
in the unit. Be sure to aim the remote towards the  
LCD display.  
Setting up Antennas  
About This Manual  
1
For external FM reception, the unit is provided  
with a FM Antenna Wire (35), move the wire  
until the reception is clear and with no  
interferences.  
Instructions in this manual describe the control  
functions of the CR02-001A.  
Operation  
Install/Replace the Remote Control Battery  
Using the Alarm....................... 8  
Radio Operation....................... 8  
Listening to Your iPod............. 8  
Remote Control....................... 9  
Sleep Mode............................. 9  
Auxiliary Input.......................... 9  
General  
Included in the package:  
Tempo Radio  
The remote control battery is already installed at the  
factory. When the remote control stops operating or  
its range seems reduced, replace the battery with  
a new one.  
Remote Control  
FM antenna wire  
AM loop antenna  
AC Adaptor  
2
For AM reception, the unit is provided with a  
directional build-in ferrite antenna. Rotate the  
set to find the position in which the best reception  
is obtained.  
1
The battery door is located on the back end of  
the unit.  
3.5mm stereo cable  
2
Squeeze notched tab A while pulling battery  
door latch B to release the battery door latch  
and take out the battery holder.  
Troubleshooting Guide............ 10-11  
AM Loop Antenna (34)  
FM Antenna Wire (35)  
Warranty................................... 12  
A
Sleep Mode  
Battery  
door  
latch  
B
Sleep mode lets you sleep to your iPod  
or the radio, gradually lowering the volume  
until the unit shuts off at the selected time.  
3
4
Insert a “CR2025“ 3-volt lithium battery. Make  
sure the polarity (the +and - side of the battery)  
is correct.  
1
2
Press the Sleep Button (12) to select the  
amount of time before it turns off : 120,90,60,30  
or 15 minutes.  
Replace the battery holder back in the remote  
control.  
NOTE :  
Press the Volume +(3/25) or Volume - (2/29) to  
set the sleep volume(this volume setting is  
separate from your standard volume setting).  
PLEASE RESPECT THE ENVIRONMENT:  
DISCARD BATTERIES PROPERLY.  
CAUTION: When replacing the battery, replace only  
with the same or equivalent type.  
Auxiliary Input Jack  
Using Dimmer  
Using the Auxiliary Input Jack  
1
Press the Snooze/Dimmer Button (13/32) during  
normal operation to adjust brightness of LCD  
display.  
1
A 3.5mm stereo cable comes with your radio.  
You can use it to play non-docking iPod’s or  
other audio devices by connecting one end of  
the cable to the Aux In Jack (18) and the other  
end plugged into the line out jack of the selected  
device. Make sure there is no iPod docked in  
your unit before using the Aux In Jack. Press  
the iPod/Aux Button (1). AUX will appear on  
the display and the device is ready to use.  
9
 
Getting Started  
Getting Started  
Battery Back Up  
Power Source  
Unit Controls  
The Crosley Tempo Radio uses a battery backup  
system to maintain your clock and alarm settings  
during a power outage. In the event of a power outage,  
the battery backup will save your time and alarm  
settings until power is restored. The display light will  
also turn off until power is restored. To utilize the  
battery backup, you must install two AA batteries. The  
battery backup will not operate unless batteries are  
installed. To install batteries, follow the instructions  
below.  
18 Aux In Jack  
1
Plug the included AC adaptor cable into the  
AC Adaptor Jack (19) and the other end into a  
standard 120V wall socket. It does not operate  
on batteries.  
19 AC Adaptor Jack  
20 FM Antenna Socket  
21 AM Antenna Socket  
22 Headphone Jack  
23 Battery Compartment  
DC15V 1.3A  
AUX IN  
Setting the Clock and Date  
FM ANT.  
AM ANT.  
1
2
Press and hold the Clock Adjust Button (11).  
The clock Display will flash.  
1
2
3
Remove the Battery Compartment cover (23)  
from the back of the unit.  
18 19 20  
21 22  
23  
Press the Tune + (6) or Tune - Button (7) until  
the current time is displayed (in 12 hour mode,  
a PM indicator appears when time is set to PM;  
there is no AM indicator.)  
Install two new AA batteries in the correct position  
as shown inside the battery cover.  
Remote Controls  
33  
Reinstall the Battery Compartment cover (23) .  
24 Power ON/OFF Button  
25 Volume + Button  
26 Next track  
3
4
Press the Clock Adjust Button (11) to accept  
the time. The year display will flash.  
NOTE :  
Do not different batteries  
Do not mix old and new batteries  
27 (BAND)AM/FM Button  
Press the Tune + (6) or Tune - Button (7) to  
adjust the year and press the Clock Adjust  
Button (11). The date display will flash.  
24  
25  
28 Play/Stop  
Button  
29 Volume - Button  
30 Previous track  
31 Radio Button  
32 Snooze/Dimmer Button  
33 AC Adaptor  
29  
5
Press the Tune + (6) or Tune - Button (7) to  
adjust the date and press the Clock Adjust  
Button(11).The setting is complete.  
VOL  
34 AM Loop Antenna  
35 FM Antenna Wire  
30  
31  
32  
26  
27  
28  
RADIO  
AM/FM  
iPOD  
SNOOZE  
DIMMER  
AM Loop Antenna (34)  
FM Antenna Wire (35)  
6
7
 

Creative MP3 Player FX120 User Manual
Cub Cadet Snow Blower 221 LHP User Manual
Curtis Clock Radio KCR2610 User Manual
Delta Electronics Network Card SISN811 User Manual
Delta Electronics Power Supply SIA3220 User Manual
D Link Network Router G0 RT N300 User Manual
Dynex TV Antenna DX LCD19 09 User Manual
Euro Pro Food Processor FP107 User Manual
Fisher Price MP3 Player K3420 User Manual
Fundex Games Games Disc Master User Manual